MCP1

The MATO MCP1 Belt Cleaning Unit is an aggressive head drum cleaner
consisting of a multiple blade section, in line, mounted just under the Tangential
centre line of the head pulley, to remove the bulk of the carry back material to
return to the main flow of product being conveyed. The MCP1 cleaner is mounted
underneath the head drum to ensure no material build up occurs on the cleaner
unit, and to eliminate the risk of damage from the cleaner to the belt.

Each blade is individually mounted with a rubber tensioning cushion to ensure
even blade pressure across the face of the head drum. Tungsten carbide blades
are used for fully Vulcanised Belts and Polyurethane Blades are used for
mechanically fastened belts.

Tungsten Carbide Blades: MATO offers different grades of Tungsten Carbide to
suit each application. E.g. Tungsten Impact where used with aggressive products
or belts, Tungsten long life for high speed, abrasive, applications (Not for use
with mechanical fasteners.)

Features:
- Easy blade replacement
- Outstanding performance on sticky material
- Clog free operation
- Various blade options
- Multi-bladed with individual cushion mounts
- Can operate on reversing belt

MCS2

The MATO MCS2 Belt Cleaning Unit is a multi-bladed inline system. Each
blade is individually mounted with a rubber tensioning cushion to ensure even
blade pressure, and constant tip contact across the belt surface.

The cleaner is designed to be slim-lined, so it can fit into almost any position,
taking up the minimal amount of room possible. The MCS2 Secondary Cleaner
is suitable for all applications and works extremely well on high speed fully
vulcanised belts, ensuring a clog-free operation. The cleaner is easy to install
and maintain, and can be installed virtually anywhere on the belt.

Tungsten Carbide Blades: MATO offers different grades of Tungsten Carbide
to suit each application. Eg. Tungsten Impact where used with aggressive
products or belts, Tungsten long life for high speed, abrasive, applications.
(Not for use with mechanical fasteners.)

Features:
- Fits into confined spaces
- Outstanding performance on sticky material
- Easy installation and maintenance
- Various blade options
- Multi-bladed with individual cushion mounts
- Long blade life

MCR1 Vee Plough

The MATO MCR1 Vee Plough is an economical free floating returns plough and
is best suited installed prior to any returns belt pulley, tail pulley or loop take up
installations.The MCR1 has a robust construction, allowing for easy installation and recovery if needed. The MCR1 is supported by four chain anchor points to
fix to any conveyor structure, thus allowing the unit to free float with varying
belt conditions.

Features: Easy blade replacement, economical, ease of installation, free floating.

MCR2 Diagonal Plough

The MATO MCR2 Diagonal Plough has all the same features as the MCR1
Plough above, however one blade assembled to the unit is designed to cover
the entire width of the conveyor belt. This unit allows for all the materials
removed by the plough to be deposited to the desired side of the conveyor belt. The MATO MCR2 Diagonal Plough is easily changed from a right hand side configuration, to a left hand side unit, as all the cleaner blades are interchangeable.

Features: Single direction discharge, economical, ease of installation, free floating.

MUR1 Vee Plough

The MATO MUR1 Plough Type Belt Cleaner is a proven design that offers effective cleaning of the return belt, ease of maintenance and installation.

Features:
- Profiled urethane, replaceable, blade offers effective cleaning and protection
ttof return pulley.
- Unique urethane tensioning system provides optimal tensioning of plough
ttagainst belt.
- Ideally suited to use on belts with mechanical fasteners.
- Simple design of fabricated items provides ease of installation, maintenance
ttand blade replacement.
- High quality paint finish optimizes life of fabricated components